Aluminum alloy machining

Aluminum alloy has the characteristics of low density, good mechanical properties, good machining properties, non-toxic, easy to recycle, electrical conductivity, heat transfer and corrosion resistance.

Aluminum alloy

Aluminum alloy

Introduction

An alloy based on aluminum with a certain amount of other alloying elements is one of the light metal materials. In addition to the general characteristics of aluminum, aluminum alloys have some specific characteristics of alloys due to the different types and quantities of added alloying elements.

The density of aluminum alloy is 2.63~2.85g/cm, high strength (σb is 110~650MPa), specific strength is close to high alloy steel, specific stiffness is higher than steel, good casting performance and plastic machining performance, good electrical conductivity , Thermal conductivity, good corrosion resistance and weldability, can be used as structural materials, has a wide range of applications in aerospace, aviation, transportation, construction, electromechanical, light and daily necessities.

Aluminum alloy characteristics



6061-T6 Aluminum
Yield strength Elongation at break Hardness Density Maximum temperature
35,000 psi 12.50% B95 2.768 g/㎤ 1080° F

7075-T6 Aluminum
Yield strength Elongation at break Hardness Density Maximum temperature
68,000 psi 11% B86 2.768 g/㎤ 380° F

5052 Aluminum
Yield strength Elongation at break Hardness Density Maximum temperature
23,000 psi 8% B60 2.768 g/㎤ 300° F

6063 Aluminum
Yield strength Elongation at break Hardness Density Maximum temperature
16,900 psi 11% B55 2.768 g/㎤ 212° F

MIC6 Aluminum
Yield strength Elongation at break Hardness Density Maximum temperature
23,900 psi 3% B65 2.768 g/㎤ 1200° F

CNC machining range


CNC milling
machining type Maximum size Minimum size Nominal thickness
Three-axis 1100mm x 800mm x 650mm 0.1 cm. x 0.2 cm. x 0.2 cm 1mm
Four axis 550mm x 350mm x 200mm 0.1 cm. x 0.2 cm. x 0.2 cm 1mm
Five axis 550mm x 350mm x 200mm 0.1 cm. x 0.2 cm. x 0.2 cm 1mm

CNC turning
Maximum diameter size The longest length Minimum Diameter and Small Size Minimum length Nominal thickness
260mm 1100mm 0.1mm 0.2mm 0.25mm

Services and solutions

Pain itself is the key to the elite. More information on how to handle our exercises.

Precision manufacturing

Scan! Add WhatsAPP

Precision machining

Scan! Add WeChat