CNC milling service capability

From prototype design to complete production operation. Our 3-axis, 3+2-axis and full 5-axis milling centers will enable you to produce high-precision and high-quality parts to meet your most stringent requirements.

The 5-axis CNC milling center can produce parts with complex geometries and increase productivity by minimizing the number of machine settings.

3-axis and 3+2 axis CNC milling machines have the lowest start-up machining costs. They are used to produce parts with relatively simple geometric shapes.

▨ Manufacturing partners who have passed ISO9001 certification upon request

▨ Each order includes an inspection report. Provide full-scale inspection report upon request

▨ Material certification and test reports are available upon request


More quality reports

Dimension guide: CNC milling

machining type Maximum size Minimum size Nominal thickness
Three-axis machining 1100mm x 800mm x 650mm 0.1 cm. x 0.2 cm. x 0.2 cm. 1mm
Four-axis machining 550mm x 350mm x 200mm 0.1 cm. x 0.2 cm. x 0.2 cm. 1mm
Five-axis machining 550mm x 350mm x 200mm 0.1 cm. x 0.2 cm. x 0.2 cm. 1mm

Usually, the machining tolerance of Green Bat Technology is +/- 0.13 mm. It is recommended that the thickness of all areas of the part should be greater than 0.51 mm, and the nominal thickness of the part is required to be greater than 1.02 mm. The maximum depth that can be milled from either side of the part is 50.8 mm.

*The size of these parts can only be milled on both sides of magnesium alloy, aluminum alloy and stainless steel.




Commonly used machining materials


Material grade Tensile strength Elongation at break Yield point Density Maximum temperature
Magnesium alloy AZ91D 230 MPa 3.0 % 150 MPa 1.81 g/㎤ 595 °C
Magnesium alloy AZ80A 290 MPa 2~5.0 % 179 MPa 1.80 g/㎤ 595 °C
Magnesium alloy ZK61B 330 MPa 12 % 178 MPa 1.80 g/㎤ 630 °C
Magnesium alloy AZ31B 280 MPa 8 % 160 MPa 1.76 g/㎤ 596 °C
Magnesium alloy AZ61B 280 MPa 14 % 165 MPa 1.80 g/㎤ 653 °C
Magnesium alloy AM60B 221 MPa 4.0 % 131 MPa 1.80 g/㎤ 482 °C

If you want to provide materials used to manufacture parts, you can also provide information about your product materials to our customer service. After machining your information, we will continue to provide shipping information and material ID numbers.

Material grade Yield strength Elongation at break Hardness Density Maximum temperature
6061-T6 aluminum 35,000 psi 12.50% B95 2.768 g/㎤ 1080° F
7075-T6 aluminum 68,000 psi 11% B86 2.768 g/㎤ 380° F
5052 aluminum 23,000 psi 8% B60 2.768 g/㎤ 300° F
6063 aluminum 16,900 psi 11% B55 2.768 g/㎤ 212° F
MIC6 aluminum 23,900 psi 3% B65 2.768 g/㎤ 1200° F

If you want to provide materials used to manufacture parts, you can also provide information about your product materials to our customer service. After machining your information, we will continue to provide shipping information and material ID numbers.

Material grade Tensile strength Elongation at break Yield point Density Maximum temperature
303 stainless steel 620 MPa 50% 140 MPa 8 g/cm3 1420 °C
304L stainless steel 505 MPa 70% 215 MPa 8 g/cm3 1455 °C
316L stainless steel 560 MPa 50% 290 MPa 8 g/cm3 925 °C
410 S stainless steel 1475 MPa 11% 1005 MPa 7.8 g/cm3 815 °C
416 stainless steel 760 MPa 22.5% 585 MPa 7.8 g/cm3 760 °C

If you want to provide materials used to manufacture parts, you can also provide information about your product materials to our customer service. After machining your information, we will continue to provide shipping information and material ID numbers.

Name Grade Process Delivery time Drawings Application
Stainless steel 303/304/316/410/416 cnc turning 3 days (expedited), 5-7 days (standard) 3D, stop, UG/3DMS programming Military accessories, handles, bases
ABS ABS cnc turning 3 days (expedited), 5-7 days (standard) 3D, stop, UG/3DMS programming Medical equipment parts, components, housings
Brass 360 Brass cnc turning 3 days (expedited), 5-7 days (standard) 3D, stop, UG/3DMS programming High-frequency and ultra-high-frequency launch tubes, crossing catheters, magnetrons
Bronze 932 bronze cnc turning 3 days (expedited), 5-7 days (standard) 3D, stop, UG/3DMS programming Used to make elastic components and wear-resistant parts
Titanium alloy Titanium Grade 5 cnc turning 3 days (expedited), 5-7 days (standard) 3D, stop, UG/3DMS programming Aerospace fasteners, engine parts, aircraft parts, marine applications

If you want to provide materials used to manufacture parts, you can also provide information about your product materials to our customer service. After machining your information, we will continue to provide shipping information and material ID numbers.

Services and solutions

Through the use of rapid molds, you can obtain your molded parts quickly and at low cost with production-grade materials and technical processes for rapid injection molding in small batches.

Precision manufacturing

Scan! Add WhatsAPP

Precision machining

Scan! Add WeChat